Grass Valley 2040RDA-16FR - Manual (Page 9)

2040RDA-FR/16FR — Instruction Manual 9
2040RDA-FR, 2040RDA-16FR
Fiber Ready Distribution
Amplifiers
Introduction
The 2040RDA-FR and 2040RDA-16FR Fiber Ready Distribution Amplifiers
provides one electrical input by either eight or sixteen non-inverting elec-
trical outputs for distributing SD, HD, and DVB-ASI signals. The module
also handles optical/electrical fiber conversion with optional low power
single mode SFP (Small-form Factor Pluggable)/LC 1310nm optical trans-
ceiver (input/output) or dual transmitter submodules. This provides both
optical inputs and outputs depending on the type of submodule installed
in the rear module.
Auto-detection and reclocking capability are available at all SD (standard
definition) and HD (high definition) data rates. The reclocking circuit can
be bypassed to distribute signals down to 4 Mbps.
The 2040RDA-FR and 2040RDA-16FR features include:
• 2040RDA-FR: Eight BNC electrical outputs, one BNC electrical input, or
• 2040RDA-16FR: Sixteen BNC electrical outputs, one BNC electrical
input,
• Single mode fiber optic submodule option for dual transmitter (2 out-
puts) or transceiver (1 input/1 output),
• Module and SFP submodule are both hot-swappable,
• Automatic data rate detection,
• Reclocks at 143 Mb/s, 177 Mb/s, 270 Mb/s, 360 Mb/s, 540 Mb/s, or
1485 Mb/s,
• Distributes transport streams in bypass mode,
• Auto-adjust rise/fall times to meet either the SD or HD standard, and
• Supports networked control and monitoring in frames with 2000NET
module.