Grass Valley 2040RDA-16FR - Manual (Page 18)

18 2040RDA-FR/16FR — Instruction Manual
Installation
Cabling
All cabling to the 2040RDA-FR or 2040RDA-16FR module sets is done on
the corresponding Single Height 2040RDA-FR or Dual Height
2040RDA-16FR rear module at the back of the 2000 frame.
Cabling of the rear module depends on what SFP option is installed as fol-
lows:
• 2040RDA-FR or 2040RDA-16FR with no SFP Optical submodule option
(electrical only) (
page 18 )
• 2040RDA-FR or 2040RDA-16FR with SFP-13103G-M1DTX (Dual
Optical Transmitter) option (
page 20 )
• 2040RDA-FR or 2040RDA-16FR with SFP-13103G-M1TRX (Optical
Transceiver) option (
page 21 )
2040RDA-FR or 2040RDA-16FR with No SFP Option
The 2040RDA-FR or 2040RDA-16FR can input one electrical SD/HD/ASI
input with either eight or sixteen electrical outputs. On-board jumpers JP2
and JP3 on the circuit board have no effect and can be set for any configu-
ration. Refer to
Figure 12 for an illustration of the input and output BNCs
for 2040RDA-FR or refer to Figure 13 for an illustration of the input and
output BNCs for 2040RDA-16FR.
Figure 12. 2040RDA-FR Rear Module Input/Output Connectors
Figure 13. 2040RDA-16FR Rear Module Input/Output Connectors
J6 J7 J8 J9 J10
2040RDA
-FR
J5 J3 J4 J2 J1
Input
SFP Submodule
connector cage
8360_01
Outputs BNC J1, J3-J9
J6 J7 J8
J9
2040
RDA-16
J5 J3 J4 J2 J1
J15 J16 J17
Input
J14 J12 J13 J11 J10
SFP Submodule
connector cage
8269_02
Outputs J1 – J8
Outputs J9 – J16