Grass Valley 2040RDA-16FR - Manual (Page 41)

2040RDA-FR/16FR — Instruction Manual 41
Specifications
Specifications
Table 4. 2040RDA-FR or 2040RDA-16FR Specifications
Parameter Value
Serial Digital Component Inputs
Coax Input
Number and type of inputs One 75 ¾ BNC
Return loss >15 dB 0.004 to 1.5 GHz
Signal type
(auto equalizing only) 1 Mb/s to 540 Mb/s NRZ PRBS Pattern X
23
+ X
5
+ 1
Rise/fall time (20 to 80%): 400-800 pS
Signal level: 800 mV p-p ± 10%
AES 3id-2001 (32 k to 96 k sample rates, 0.8 to 1.2 V p-p)
SMPTE 310M-1998 (10.76 Mb/s, 19.39 Mb/s, 38.78 Mb/s)
Signal type
(auto equalizing and
reclocking) SMPTE 259M-1997 with the following tolerances on bit rates:
143 Mb/s ± 0.5%
177 Mb/s ± 0.5%
270 Mb/s ± 0.5%
360 Mb/s ± 0.5%
ETSI TR 101 891v1.1.1 (DVB-ASI) with bit rate tolerance on 270 Mb/s of ±0.5%
SMPTE 344M- 2000 with bit rate tolerance on 540 Mb/s of ±0.5%
SMPTE 292M- 1998 with bit rate tolerance on 1.485 Mb/s of ±0.5%
Auto equalization cable
length
(for any of the above signal
types) Up to 300 m of Belden 1694A cable for bit rates up to 270 Mb/s
Up to 100 m of Belden 1694A cable for bit rates > 270 Mb/s and < 1.5 Gb/s
Input jitter
(on any of the above signal
types) ð 1 UI p-p, 10 Hz to 200 Hz
ð 0.2 UI p-p, 200 Hz to 10 MHz
Serial Digital Component Outputs
Coax Outputs
Number and type of out-
puts Eight 75 ¾ BNCs on 2040RDA-FR-R or
Sixteen 75 ¾ BNCs on 2040RDA-16FR-R
Return loss >15 dB 0.004 to 540 MHz, >10 dB from 540 MHz to 1.5 GHz
Signal level 800 mV p-p ± 10% maximum
Rise and fall time
(20-80%) < 270 ps for reclocked HD
400-800 ps for SD and Bypass mode
Output polarity Non-inverting, all outputs
Jitter For input with < 0.1 UI jitter, < 0.2 UI
Fiber Outputs
Connector Up to two LC (IEC 61754-20)
Fiber type
Single mode, complying with ANSI/TIA/EIA-492CAAA
(class 1Va dispersion -unshifted, 9/125 micron step index {SI} fiber)
Maximum attenuation of 1.0 dB per kilometer at 1310 nm
Wavelength 1274 to 1356 nm
Output power -12 to -7.5 dBm (average @ 1310 nm)
Standard Other than LC connectors, conforms to SMPTE 297M-2000
Polarity Non-inverting
Jitter For input with < 0.1 UI jitter, < 0.2 UI
Input to Output
Jitter transfer TBD