Grass Valley 2040RDA-16FR - Manual (Page 19)

2040RDA-FR/16FR — Instruction Manual 19
Installation
Electrical Input
Connect an electrical SD, HD, or ASI video input to BNC J10 on the
2040RDA-FR or BNC J17 on the 2040RDA-16FR. The 2040RDA-FR and
2040RDA-16FR will accept any of the serial digital component video
signals conforming to the following formats:
• SMPTE 259M (143 Mb/s, 177 Mb/s, 270 Mb/s, and 360 Mb/s)
• SMPTE 292M (1.485 and 1.485/1.001 Gb/s)
• SMPTE 344M (540 Mb/s)
• 4 Mbps to 1.5 Gb/s
• SMPTE 310M (MPEG up to 38.78 M/bps)
• DVB-ASI
Electrical Outputs
On the 2040RDA-FR the input signal is distributed to 8 output BNCs.
Connect video output devices to outputs J1 and J3 through J9 provided on
the 2040RDA-FR rear module (
Figure 12 on page 18 ).
On the 2040RDA-16FR the input signal is distributed to 16 output BNCs.
Connect video output devices to outputs J1 through J8 and J9 through J16
provided on the 2040RDA-16FR rear module (
Figure 13 on page 18 ).