Grass Valley 2040RDA-16FR - Manual (Page 16)

16 2040RDA-FR/16FR — Instruction Manual
Installation
Figure 7. Installing SFP Submodule on 2040RDA-FR
Figure 8. Installing SFP Submodule on 2040RDA-16FR
6. For the 2040RDA-FR locate the front slot 1-12 in the frame
corresponding to the rear module circuit board. The 3 RU frame front
view is illustrated in
Figure 9 .
Figure 9. 2000 Series 3 RU Frame, 2040RDA-FR Frame Slots
7. For the 2040RDA-16FR locate the front slot 1, 3, 5, 7, 9, or 11 in the frame
corresponding to the rear module circuit board. The 3 RU frame front
view is illustrated in
Figure 10 . Module slots where the 2040RDA-16FR
should be installed for a fully stuffed 2000 frame are highlighted in
gray.
Note 2040RDA-16FR modules are not limited to these slots. The dual height rear
and corresponding front module can be placed in any location as long as
there is enough space.
8360_09
Label
Handle in
up position
Arrow Indicators
2040RDA
-FR
J3
8269_11
Label
Handle in
up position
Arrow Indicators
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(1)
Install Front Media modules
into slots 1-12
8360_12