H3C Technologies H3C SecBlade FW Cards - Manual (Page 7)

6
Closing an ACSEI client
Follow these steps to close an ACSEI client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACSEI server function acsei server enable Required
Enter ACSEI server view acsei server —
Close the specified ACSEI client acsei client close client-id Required
Restarting an ACSEI client
Follow these steps to restart an ACSEI client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACSEI server function acsei server enable Required
Enter ACSEI server view acsei server —
Restart the specified ACSEI client acsei client reboot client-id Required
Displaying and maintaining ACSEI server
To do… Use the command… Remarks
Display ACSEI client summary display acsei client summary [ client-id ]
Available in any view
Display ACSEI client information display acsei client info [ client-id ]
Configuring ACSEI client (supported on a SecBlade
firewall card)
As a function supported by a SecBlade firewall card, ACSEI client is integrated into the software system
of the SecBlade firewall card.
Enabling ACSEI client
Follow these steps to enable ACSEI client:
To do… Use the command… Remarks
Enter system view system-view —
Enter the interface view of the
internal Ethernet interface interface interface-type
interface-number
Required
Enable ACSEI client acsei-client enable
Required
Disabled by default.