H3C Technologies H3C SecBlade FW Cards - Manual (Page 6)

5
1. Enable ACSEI client.
2. Start up the device and enable the ACSEI server function on it.
3. The ACSEI client multicasts registration requests.
4. After the ACSEI server receives a valid registration request, it negotiates parameters with the
ACSEI client and establishes a connection with the client if the negotiation succeeds.
5. The ACSEI server and the ACSEI client mutually monitor the connection.
6. If detecting the disconnection of the ACSEI client, the ACFP server will remove the configuration
and policies associated with the client.
ACSEI server configuration (supported on a host
device)
Enabling ACSEI server
Follow these steps to enable ACSEI server:
To do… Use the command… Remarks
Enter system view system-view —
Enable ACSEI server acsei server enable
Required
Disabled by default.
Configuring the clock synchronization timer
Follow these steps to configure the clock synchronization timer:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACSEI server function acsei server enable Required
Enter ACSEI server view acsei server —
Configure the clock
synchronization timer from ACSEI
server to ACSEI client acsei timer clock-sync minutes
Optional
Five minutes by default.
Configuring the monitoring timer
Follow these steps to configure the monitoring timer:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACSEI server function acsei server enable Required
Enter ACSEI server view acsei server —
Configure the monitoring timer for the
ACSEI server to monitor the ACSEI client acsei timer monitor
seconds Optional
Five seconds by default.