H3C Technologies H3C SecBlade FW Cards - Manual (Page 19)

10
display acsei client summary
Syntax
display acsei client summary [ client-id ]
View
Any view
Default Level
1: Monitor level
Parameters
client-id: ID of an ACSEI client whose summary is to be displayed, in the range 1 to 10.
Description
Use the display acsei client summary command to display ACSEI client summary information. Summary
information of multiple ACSEI clients is displayed in order of registration time.
If executed without the client-id argument, the command displays summary information about all the
ACSEI clients.
Examples
# Display the summary of all ACSEI clients.
display acsei client summary
Total client Number: 1
client ID: 1
Status: Open
MAC Address: 00e0-fc0a-c3ef
Interface: Ten-GigabitEthernet3/0/1
Last registered: 02/08/2007 12:00:00
Table 2 Output description
Field Description
client ID ID of the ACSEI client
Status ACSEI client status
MAC Address MAC address of the ACSEI client
Interface Interface carrying the ACSEI client
Last registered The last registration time of the ACSEI client
ACSEI client configuration commands
acsei-client enable
Syntax
acsei-client enable
undo acsei-client enable