H3C Technologies H3C SecBlade FW Cards - Manual (Page 17)

8
Description
Use the acsei timer monitor command to set the monitoring timer for the ACSEI server to monitor the
ACSEI clients.
Use the undo acsei timer monitor command to restore the default.
By default, the monitoring timer is set to 5 seconds.
Examples
# Set the monitor timer for the ACSEI server to monitor the ACSEI clients to 6 seconds.
system-view
[Sysname] acsei server
[Sysname-acsei-server] acsei timer monitor 6
display acsei client info
Syntax
display acsei client info [ client-id ]
View
Any view
Default Level
1: Monitor level
Parameters
client-id: ID of an ACSEI client, in the range 1 to 10.
Description
Use the display acsei client info command to display the ACSEI client information. The client information
is retrieved from the advertisement packet sent by the client, so that when there is no ACSEI client
information, the command displays the information keywords only.
If executed without the client-id argument, the command displays information about all the ACSEI clients
in order of registration time.
Examples
# Display information about ACSEI client 1.
display acsei client info 1
client ID: 1
client Description:
Hardware:
System Software:
Application Software:
CPU: Intel(R) Pentium(R) M processor 1.40GHz
PCB Version: 3.00
CPLD Version: 1.00
Bootrom Version: 1.12
CF card: 256 MB
Memory: 512 MB
Harddisk: 40.0 GB
# Display information about all ACSEI clients.