H3C Technologies H3C SecBlade FW Cards - Manual (Page 21)

12
Harddisk:
display acsei-client status
Syntax
display acsei-client status
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display acsei-client status command to display the current state of ACSEI client.
Examples
# Display the current state of ACSEI client.
display acsei-client status
Client ID: 1
Status: Open
Slot Number: 1
Interface: Ten-GigabitEthernet0/0
Table 3 Output description
Field Description
Client ID ID of the ACSEI client
Status
ACSEI client status:
Open: Enabled.
Closed: Not enabled.
Reg_Sent: Registration in process.
Slot Number Sequence number of the slot where the ACSEI client resides
Interface Interface enabled with ACSEI client