H3C Technologies H3C SecBlade FW Cards - Manual (Page 2)

1
OAP card configuration
OAP card overview
Open Application Platform (OAP)
is developed by Hangzhou H3C Technologies Co., Ltd. (referred to as H3C hereinafter), aimed at new
services. An OAP card runs an independent operating system. You can load software such as security
and voice in the operating system as needed.
By using OAP, the primary network devices such as an
S5800/S7500E/S9500E/S12500/SR6600/SR8800 of H3C integrate the security functions with
firewall cards. A SecBlade firewall card runs an independent operating system; it interacts with the
device on data, status information and control information through its internal service interfaces.
Redirecting to the SecBlade firewall card from the
device
You can redirect to the system of a SecBlade firewall card from a host device (such as an
S5800/S7500E/9500 E/S12500/SR6600/SR8800) through the following operation. In this way, the
terminal display interface will be switched from the command line interface of the host device to the
operating interface of the system on the SecBlade firewall card. After the switch, you can press Ctrl+K to
return to the command line interface on the host device.
CAUTION:
If you log in to a SecBlade firewall card using the following command from a host device, you log in to the
SecBlade firewall card system as if you log in through the AUX port. Therefore, to ensure normal login,
you need to set the authentication mode at login and the user level in AUX view on the SecBlade firewall
card user interface.
Follow these steps to redirect from the device to the SecBlade firewall card:
To do… Use the command… Remarks
Redirect from the host device to the
SecBlade firewall card (SR6600/SR8800,
or S7500E/S9500E/S12500 in
standalone mode)
oap connect slot slot-number
Required
Available in user view
Redirect from the host device to the
SecBlade firewall card (S5800) oap connect slot slot-number
system system-name Required
Available in user view
Redirect from the host device to the
SecBlade firewall card
(S7500E/S9500E/S12500 in IRF mode)
oap connect chassis
chassis-number slot slot-number Required
Available in user view