Ge copper ethernet port, Ge fiber ethernet port – H3C Technologies H3C SecPath F5000-S Firewall User Manual
Page 69
60
Item Specification
Services
•
Connected to an ASCII terminal
•
Provides connection to the serial port of a local PC to run the terminal
emulation program
•
CLI
GE copper Ethernet port
The firewall provides twelve 10/100/1000Base-T copper Ethernet ports.
Table 25 Copper Ethernet port specifications
Item Specification
Connector RJ-45
Standard compliance
802.3, 802.3u, and 802.3ab
Interface type
MDI/MDI-X autosensing
Cable type
Category 5 or higher twisted pair cable
Transmission distance
100 m (328.08 ft)
Interface speed and duplex mode
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
NOTE:
The media dependent interface (MDI) standard is typically used on the Ethernet port of network adapters.
The media dependent interface crossover (MDI-X) standard is typically used on hubs or LAN switches.
GE fiber Ethernet port
The firewall provides twelve 1000Base-X fiber Ethernet ports.
Table 26 Fiber Ethernet port specifications
Item Specification
Connector type
LC
Transceiver module type
SFP
Standard compliance
1000Base-X
Interface speed
1000 Mbps
Duplex mode
Full duplex