H3C Technologies H3C SecPath F5000-S Firewall - Manual (Page 20)

11
The firewall can be installed with front mounting brackets or rear mounting brackets. The installation
procedures are similar. This section takes front mounting bracket installation as an example.
To install the firewall to the 19-inch rack:
1. Unpack the firewall and accessories.
2. Install a new rack shelf or adjust the position of an existing rack shelf according to the position
where the firewall is to be installed.
3. Mark the positions of cage nuts one by one on the front rack posts by using a front mounting
bracket, and install the cage nuts.
Figure 5 Installing cage nuts
4. Attach the front mounting brackets to both sides of the firewall with M4 screws provided with the
firewall.