H3C Technologies H3C SecPath F5000-S Firewall - Manual (Page 46)

37
Table 8 Configuration items
Item Description
IP Configuration
Set the approach for obtaining the IP address, including:
• None—The IP address of the interface is not specified.
The interface has no IP address.
• Static Address—Specify the IP address for the interface
manually. If you select this item, specify both the IP
address and the mask.
• DHCP—The interface obtains an IP address
automatically through the DHCP protocol.
• Do not change—The IP address of the interface does
not change.
IMPORTANT:
Modification to the
interface IP address
results in disconnection
with the device, so make
changes with caution.
IP Address If you select Stack Address as the approach for obtaining
the IP address, set the interface IP address and network
mask.
Mask
9. Click Next.
The page for configuring NAT appears.
Figure 32 Basic configuration wizard—5/6 (NAT configuration)
10. Configure the parameters as described in Table 9 .