H3C Technologies H3C S3100V2 Series Switches - Manual (Page 41)

33
To do... Use the command... Remarks
Return to system view quit —
Enable the created user profile user-profile profile-name enable
Required
Disabled by default.
NOTE:
•
For more information about the user-profile and user-profile enable commands, see the Security
Command Reference.
• A multicast user control policy is functionally similar to a multicast group filter. A difference lies in that a
control policy can control both multicast joining and leaving of users based on authentication and
authorization, but a multicast group filter is configured on a port to control only multicast joining but not
leaving of users without authentication or authorization.
Displaying and maintaining IGMP snooping
To do... Use the command... Remarks
Display IGMP snooping group
information
display igmp-snooping group [ vlan vlan-id ]
[ slot slot-number ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in
any view
Display the statistics information of
IGMP messages learned by IGMP
snooping
display igmp-snooping statistics [ | { begin |
exclude | include } regular-expression ] Available in
any view
Display static multicast MAC address
entries
display mac-address [ mac-address [ vlan
vlan-id ] | [ multicast ] [ vlan vlan-id ] [ count ] ] [ |
{ begin | exclude | include } regular-expression ]
Available in
any view
Remove all the dynamic group entries of
a specified IGMP snooping group or all
IGMP snooping groups
reset igmp-snooping group { group-address |
all } [ vlan vlan-id ]
Available in
user view
Clear the statistics information of all
kinds of IGMP messages learned by
IGMP snooping
reset igmp-snooping statistics
Available in
user view
NOTE:
•
The reset igmp-snooping group command works only on an IGMP snooping–enabled VLAN, but not
on a VLAN with IGMP enabled on its VLAN interface.
• The reset igmp-snooping group command cannot remove the static group entries of IGMP snooping
groups.