H3C Technologies H3C S3100V2 Series Switches - Manual (Page 107)

99
To do... Use the command... Remarks
Configure the specified VLAN as
an IPv6 multicast VLAN and enter
IPv6 multicast VLAN view
multicast-vlan ipv6 vlan-id
Required
No IPv6 multicast VLAN
configured by default
Assign port(s) to the IPv6 multicast
VLAN
port interface-list
Required
By default, an IPv6 multicast
VLAN has no ports.
Configure IPv6 multicast VLAN ports in interface view or port group view
Follow these steps to configure IPv6 multicast VLAN ports in interface view or port group view:
To do… Use this command… Remarks
Enter system view system-view —
Configure the specified VLAN
as an IPv6 multicast VLAN and
enter IPv6 multicast VLAN view
multicast-vlan ipv6 vlan-id
Required
Not an IPv6 multicast VLAN
by default.
Return to system view quit —
interface interface-type interface-number
Enter interface view or port
group view
port-group manual port-group-name
Required
Use either command.
Configure the port(s) as port(s)
of the IPv6 multicast VLAN
port multicast-vlan ipv6 vlan-id
Required
By default, a user port does
not belong to any IPv6
multicast VLAN.
NOTE:
•
Do not configure IPv6 multicast VLAN on a device with multicast routing enabled.
• The VLAN to be configured as an IPv6 multicast VLAN must exist.
• A port can belong to only one IPv6 multicast VLAN.
Displaying and maintaining IPv6 multicast VLAN
To do… Use the command… Remarks
Display information about an IPv6
multicast VLAN
display multicast-vlan ipv6
[ vlan-id ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
IPv6 multicast VLAN configuration examples
Port-based multicast VLAN configuration example
Network requirements
• As shown in Figure 31 , Router A connects to an IPv6 multicast source—Source—through Ethernet
1/0/1, and to Switch A through Ethernet 1/0/2.