H3C Technologies H3C S3100V2 Series Switches User Manual

Page 47

CAUTION:
•

If you log in to the switch through the console port after powering on the switch, no boot information is
displayed, and you will enter the command line interface (CLI).

•

The output information varies depending on the software version.

Starting......

************************************************************************

* *

* H3C S3100V2-26TP-PWR-EI BOOTROM, Version 107 *

* *

************************************************************************

Creation Date : Jan 19 2011,10:54:47

CPU Clock Speed : 200MHz

Memory Size : 128MB

Flash Size : 16MB

CPLD Version : 003

PCB Version : Ver.A

Mac Address : 000FE2B162C4

Press Ctrl-B to enter Extended Boot menu...0

Starting to get the main application file--flash:/S3100V2_EI.bin!.................

..............................................................

The main application file is self-decompressing................................

...............................................................................

.............................Done!

System is starting...

User interface aux0 is available.

Press ENTER to get started.

Press Enter and the system displays the following prompt:

This prompt indicates that the switch is ready to configure. For more information about initial switch
configuration, see “

Initially configuring the switch

.”