H3C Technologies H3C S3100V2 Series Switches - Manual (Page 20)

14
Table 7 S3100V2 Switch Series installation methods
Switch model Installation methods Installation accessories
1. Installing the switch into the 19-inch rack
• Rack mounting by using front mounting
brackets
• Rack mounting by front mounting
brackets and a support tray
• Rack mounting by using front mounting
brackets and slide rails
Front mounting bracket. See callout A
in
Figure 17 (supplied).
Support tray: User supplied
Slide rail: See
Figure 19 (optional).
S3100V2-26TP-SI
S3100V2-26TP-EI
2. Mounting the switch on a workbench Rubber pad: See Figure 20 (supplied).
1. Installing the switch into the 19-inch rack
• Rack mounting by using front mounting
brackets
• Rack mounting by front mounting
brackets and a support tray
Front mounting bracket. See callout C
in
Figure 17 (optional).
Support tray: User supplied
S3100V2-16TP-SI
S3100V2-16TP-EI
2. Mounting the switch on a workbench Rubber pad: See Figure 20 (supplied).
1. Installing the switch into the 19-inch rack
• Rack mounting by using front mounting
brackets
• Rack mounting by front mounting
brackets and a support tray
Front mounting bracket. See callout B
in
Figure 17 (optional).
Support tray: User supplied
S3100V2-8TP-SI
S3100V2-8TP-EI
2. Mounting the switch on a workbench Rubber pad: See Figure 20 (supplied).
1. Installing the switch into the 19-inch rack
• Rack mounting by using front and rear
mounting brackets
• Rack mounting by front mounting
brackets and a support tray
• Rack mounting by using front mounting
brackets and slide rails
Front mounting bracket. See callout A
in
Figure 17 (supplied).
Rear mounting bracket: See Figure 18
(supplied).
Support tray: User supplied
Slide rail: See
Figure 19 (optional).
S3100V2-26TP-PWR-
EI
S3100V2-16TP-PWR-
EI
2. Mounting the switch on a workbench Rubber pad: See Figure 20 (supplied).
1. Installing the switch into the 19-inch rack
• Rack mounting by using front mounting
brackets
• Rack mounting by front mounting
brackets and a support tray
Front mounting bracket. See callout D
in
Figure 17 (optional).
Support tray: User supplied
Slide rail: See
Figure 19 (optional).
2. Mounting the switch on a workbench Rubber pad: See Figure 20 (supplied).
3. Mounting the switch on a wall
Wall mounting bracket: See Figure 21
(supplied).
S3100V2-8TP-PWR-EI
4. Magnet mounting Magnet kit: See Figure 23 (optional).
Installation accessories
Mounting brackets for rack mounting
The S3100V2 Switch Series provides different mounting brackets for different models. Select them as
required.