H3C Technologies H3C S7500E Series Switches - Manual (Page 59)

49
Turn on the power supply and power modules of the switch to power on the switch.
Command output varies by software version. The following is a sample output you can see on the
terminal:
RAM test successful.
Press Ctrl+T to start five-step full RAM test...
Press Ctrl+Y to start nine-step full RAM test...
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing........Done.
****************************************************************************
* *
* BootWare, Version 1.07 *
* *
****************************************************************************
Compiled Date : Oct 21 2014
CPU Type : XLP208
CPU Clock Speed : 1000MHz
Memory Type : DDR3 SDRAM
Memory Size : 2048MB
Memory Speed : 667MHz
BootWare Size : 1536KB
Flash Size : 4MB
BASIC CPLD Version : 001
EXTENDED CPLD Version : 008A
PCB Version : Ver.B
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/7500-cmw710-system-a7146.bin............................
............................................................................
.....................................................................Done.
Loading file flash:/7500-cmw710-devkit-a7146.bin.................Done.
Loading file flash:/7500-cmw710-manufacture-a7146.bin...Done.
Loading file flash:/7500-cmw710-boot-a7146.bin...........................
Done.
Image file flash:/7500-cmw710-boot-a7146.bin is self-decompressing..........
...................................................Done.
System image is starting...
Cryptographic algorithms tests passed.
Line aux0 is available.
Press ENTER to get started.