beautypg.com

Connecting the psr1400-a – H3C Technologies H3C S7500E Series Switches User Manual

Page 40

background image

30

Figure 23 Connecting the power cord

Connecting the PSR1400-A

1.

Unpack the power cord, and verify the power cord model (the PSR1400-A uses a 16 A AC power

cord).

2.

Use a Phillips screwdriver to remove the screws from the power cord retainer suite and remove the

right part of the retainer suite.

3.

Connect the power cord to the power socket on the power module, and ensure a good contact.

4.

Fasten the right part of the power cord retainer to lock the power cord.

5.

Connect the other end of the power cord to the AC power socket.

See also other documents in the category H3C Technologies Routers: