beautypg.com

Installing a cf card to the mpu (optional) – H3C Technologies H3C S7500E Series Switches User Manual

Page 52

background image

42

Figure 35 Connecting the power cords to the RPS800-A

7.

Connect the female end of the AC power cord to the AC input port on the RPS800-A. Connect the
male end of the AC power cord to the external power supply socket.

Installing a CF card to the MPU (optional)

If you select an MPU that supports the CF card, you can install a CF card as needed.
To install a CF card:

1.

Use a hard object to push the CF card eject button all the way into the slot, and make sure the

button does not project from the panel.

2.

Push the CF card all the way into the CF card slot so that it does not project. At the same time, the
eject button projects.

2

1

See also other documents in the category H3C Technologies Routers: