beautypg.com

Optical fiber, Optical fiber cable, Patch cord – H3C Technologies H3C S7500E Series Switches User Manual

Page 141

background image

131

4.

Cut the top of the wires even with one another. Insert the wires into the RJ-45 end and make sure

the wires extend to the front of the RJ-45 end and make good contact with the metal contacts in the
RJ-45 end and in the correct order.

5.

Crimp the RJ-45 connector with the crimping plier until you hear a click.

6.

Repeat the above steps with the other end of the cable.

7.

Use a cable tester to verify the connectivity of the cable.

Optical fiber

CAUTION:

Use the same types of transceiver modules, pigtail cords, patch cords, and fiber cables. If you use
single-mode optical fibers, the transceiver modules, pigtail cords, patch cords, and fiber cables must be
single-mode.

Optical fiber

Optical fibers are widely used in fiber-optic communications, which are advantageous for long-distance

communications.
Optical fibers can be classified into the following types:

Single mode fiber—It has a core size of 10 μm, and has a lower modal dispersion. It carries only

a single ray of light. It is mostly used for communication over longer distances.

Multi-mode fiber—It has a core size of 50 μm or 62.5 μm or higher, and has a higher modal
dispersion than single-mode optical fiber. It is mostly used for communication over shorter

distances.

Table 84 Allowed maximum tensile force and crush load

Period of force

Tensile load (N)

Crush load (N/mm)

Short period

150

500

Long term

80

100

Optical fiber cable

An optical fiber cable is a cable containing one or more optical fibers. The optical fiber elements are
typically individually coated with plastic layers and contained in a protective tube. Optical fiber cables

fall into single-mode and multi-mode.

Patch cord

A fiber that has connectors at both ends is called a patch cord. A patch cord connects one optical device

to another for signal routing. Patch cords fall into single-mode and multi-mode patch cords.

Single-mode patch cord—The jacket is yellow. It permits transmission over longer distances.

Multi-mode patch cord—The jacket is orange. It permits transmission over shorter distances.