H3C Technologies H3C S7500E Series Switches - Manual (Page 42)

32
Figure 25 PSR2800-ACV panel
(1) Captive screw (2) System power socket (3) Power cord retainer suite
(4) System power switch (O: off; —: on) (5) Power module status LED (6) PoE power socket
(7) PoE power switch (O: off. —: on) (8) Power module handle
Connecting the PSR6000-ACV
The PSR6000-ACV is a built-in power module with AC input and DC output. It can provide the switch with
both system power and PoE power, which can be controlled through separate power switches. Before
connecting the PSR6000-ACV power cord, make sure the system and PoE power switches are off.
The PSR6000-ACV provides four power sockets:
• One system power socket, as shown by callout 5 in Figure 26 .
• Three PoE power sockets, as shown by callout 8 in Figure 26 .
Connecting the system power cord is the same as connecting the PoE power cord. The following
illustrates how to connect the system power cord.