H3C Technologies H3C S12500-X Series Switches - Manual (Page 46)

39
# Verify that the VTEP has learned all neighbors in the VXLAN network.
[SwitchA] display vxlan neighbor-discovery server summary
Interface Local Address Network ID Auth Members
Tunnel0 1.1.1.1 1 enabled 3
[SwitchA] display vxlan neighbor-discovery server member
Interface: Tunnel0 Network ID: 1
IP Address: 1.1.1.1
Client Address System ID Expire Created Time
2.2.2.2 000F-0001-0001 25 2011/01/01 00:00:43
3.3.3.3 000F-0001-0002 24 2011/01/01 01:00:46
# Verify that all neighbors are up.
[SwitchA] display vxlan neighbor-discovery client member
Interface: Tunnel0 Network ID: 1
Local Address: 1.1.1.1
Server Address: 1.1.1.1
Neighbor System ID Created Time Expire Status
2.2.2.2 000F-0001-0001 2014/01/01 12:12:12 13 Up
3.3.3.3 000F-0001-0002 2014/01/01 12:12:12 12 Up
# Verify that all NVE and VXLAN tunnel interfaces are up.
[SwitchA] display interface tunnel
Tunnel 0
Current state: UP
Line protocol state: UP
Description: Tunnel0 Interface
Bandwidth: 64 kbps
Maximum transmission unit: 64000
Internet protocol processing: Disabled
Tunnel source 1.1.1.1
Network ID 1
Tunnel protocol/transport NVE/IP
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops
Tunnel 1
Current state: UP
Line protocol state: UP
Description: Tunnel1 Interface
Bandwidth: 64 kbps
Maximum transmission unit: 64000
Internet protocol processing: Disabled
Last clearing of counters: Never
Tunnel source 1.1.1.1, destination 2.2.2.2
Tunnel protocol/transport UDP_VXLAN/IP
Tunnel 2