Displaying and maintaining vxlans – H3C Technologies H3C S12500-X Series Switches User Manual
Page 25
18
Step Command
Remarks
2.
Enable the VTEP to
collect packet
statistics by VSI.
statistic mode vsi
By default, the VTEP collects
packet statistics by VSI.
For more information about this
command, see device
management in Fundamentals
Command Reference.
3.
Enter VSI view.
vsi vsi-name N/A
4.
Enable the packet
statistics feature for
the VSI.
statistics enable
By default, the packet statistics
feature is disabled for all VSIs.
To display packet statistics for the
VSI, use the display l2vpn vsi
verbose command.
5.
Return to user view.
return
N/A
6.
(Optional.) Clear
packet statistics for
VSIs.
reset l2vpn statistics vsi [ name vsi-name ]
N/A
Displaying and maintaining VXLANs
Execute display commands in any view and reset commands in user view.
Task Command
Display the ARP flood suppression table
(in standalone mode).
display arp suppression vsi [ name vsi-name ] [ slot slot-number ]
[ count ]
Display the ARP flood suppression table
(in IRF mode).
display arp suppression vsi [ name vsi-name ] [ chassis
chassis-number slot slot-number ] [ count ]
Display MAC address entries for VSIs.
display l2vpn mac-address [ vsi vsi-name ] [ dynamic ] [ count ]
Display information about Ethernet
service instances.
display l2vpn service-instance [ interface interface-type
interface-number [ service-instance instance-id ] ] [ verbose ]
Display information about VSIs.
display l2vpn vsi [ name vsi-name ] [ verbose ]
Display information about the multicast
groups that contain IGMP host-enabled
interfaces.
display igmp host group [ group-address | interface interface-type
interface-number ] [ verbose ]
Display information about tunnel
interfaces.
display interface [ tunnel [ number ] ] [ brief [ description | down ] ]
Display VXLAN tunnel information for
VXLANs.
display vxlan tunnel [ vxlan vxlan-id ]
Clear ARP flood suppression entries on
VSIs.
reset arp suppression vsi [ name vsi-name ]
Clear dynamic address entries on VSIs. reset l2vpn mac-address [ vsi vsi-name ]
Clear packet statistics on VSIs.
reset l2vpn statistics vsi [ name vsi-name ]