Ensemble Designs 9400 3G Test Signal and Sync Pulse Generator - Manual (Page 70)

www.ensembledesigns.com Avenue 7400 and 9400 - Page 70
Model 7400 HD/SD and Model 9400 3G/HD/SD Sync Pulse Generator and Test Signal Generator
Standards Supported
1080i 50, 59.94 or 60 Hz, SMPTE 274M -4,5,6
720p 50, 59.94 or 60 Hz, SMPTE 296M -1,2,3
1080p 23.98, 24 or 25 Hz, SMPTE 274M -9,10,11
1080sF 23.98, 24 or 25 Hz, RP211 -14,15,16
3 Gb/s Level A or Level B, SMPTE 424M, 425M 9400 only
625i 50
525i 59.94
Composite PAL, NTSC
Frame Rate Families
Each 7400 and 9400 has 2 identical Generators, each with a variety of outputs. All of the
outputs from a particular Generator must be selected within the same frame rate family.
50 Hz (625) Derived Family: 1080i/50, 720p/50, 1080p/25, 1080sF/25, 625i/50
59.94 Hz (525) Derived Family: 1080i/59.94, 720p/59.94, 1080p/23.98, 1080sF/23.98,
525i/59.94
60 Hz Derived Family: 1080i/60, 720p/60, 1080p/24, 1080sF/24
Reference Input
Number Two: External or Frame Master Reference
Signal Type PAL or NTSC composite video or HD Tri-Level Sync or
10 MHz 1V P-P sine or square
Return Loss >40 dB (applies to external ref input)
Serial Digital Outputs
Type HD Serial Digital 1.485 Gb/s, SMPTE 274M, 292M, 296M
HD Serial Digital 2.97 Gb/s, SMPTE 424M, 425M 9400 only
or SD Serial Digital 270 Mb/s, SMPTE 259M
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 300 meters for SD 270 Mb/s (Belden 1694A)
100 meters for HD 1.485 Gb/s (Belden 1694A)
70 meters for HD 2.97 Gb/s HD (Belden 1694A) 9400 only
Tri-Level Sync Outputs
Signal Type HD Tri-Level Sync
Output DC ±50 mV
Return Loss >30 dB to 30 MHz
Specifications for Models 7400 and 9400