Ensemble Designs 9400 3G Test Signal and Sync Pulse Generator - Manual (Page 23)

www.ensembledesigns.com Avenue 7400 and 9400 - Page 23
Model 7400 HD/SD and Model 9400 3G/HD/SD Sync Pulse Generator and Test Signal Generator
1RU Backplane for 7400
1RU Backplane for 9400
7400 TSG
GPS Ant.
Genlock/
10 MHz In
Out 1A Out 3B Out 1B
SDI A
Out 3A
Out 2A Out 2B SDI B A
udio
9400 TSG
GPS Ant.
Genlock/
10 MHz In
Out 1A Out 3B Out 1B
SDI A
Out 3A
Out 2A Out 2B SDI B
Audio
You can access four mono channels of audio analog tone outputs as shown in the pinout below.
Channels 1 and 2 come from Audio Generator A; Channels 3 and 4 come from Audio Generator B.
Channels 1 through 4 can be assigned to any of the 16 channels of audio from the Aud Gen A/B menu
pages.
AUD 1 is on pins 1 and 2 and the associated ground is pin 7. Pin 1 is positive. AUD 2 is on pins 4 and 5
and the associated ground is pin 8. Pin 5 is positive.
AUD 3 is on pins 11 and 12 and the associated ground is pin 9. Pin 11 is positive. AUD 4 is on pins 14
and 15 and the associated ground is pin 10. Pin 15 is positive.
1
6
+ -
11
AUD 1
+ -
AUD 2
AUD 3 AUD 4
+ - + -
Generator A
Generator B