Ensemble Designs 9400 3G Test Signal and Sync Pulse Generator - Manual (Page 24)

www.ensembledesigns.com Avenue 7400 and 9400 - Page 24
Model 7400 HD/SD and Model 9400 3G/HD/SD Sync Pulse Generator and Test Signal Generator
Generator A
• SDI Out A – Outputs HD or SD test signals (plus 3G for 9400). Select frame rate family for all
of Generator A; 59.94, 50 or 60. Output can include 16 channels of embedded audio. The
embedded audio can be any combination of the following: tone, silence, external audio. Can
also include DVITC.
• Programmable Out 1 A – Outputs analog composite black, composite 100% bars, or
Tri-Level Sync from TLS Gen 1. When SDI Out A is a SD test pattern, this BNC can also output a
composite version of that test pattern. Composite output can include VITC.
• Programmable Out 2 A – Outputs one of the following: Tri-Level Sync from TLS Gen 2 (can be
different from Out 1 A), LTC, AES (any of 8 pairs), AES silence, Word clock, 6 Hz pulse, 10 MHz
(only if locked to internal or GPS reference).
• Programmable Out 3 A – Outputs one of the following: Tri-Level Sync from TLS Gen 2 (same
as Out 2 A), LTC, AES (any of 8 pairs), AES silence, Word clock, 6 Hz pulse,10 MHz (only if locked
to internal or GPS reference).
Note: Generator A has two independent Tri-Level Sync generators; TLS Gen 1 and TLS
Gen 2. The output from TLS Gen 1 is available on BNC Out 1 A. The output from TLS Gen 2
is available on BNC’s Out 2 A and Out 3 A. Refer to the “Functional Block Diagram” on
page 8 for more information.
• Analog Audio - stereo output, 1 of 8 pairs from the audio generator.
Generator B
Has the same outputs as noted for Generator A. Generator B is completely independent from
Generator A. Generator B can operate in a different frame rate family and its set of outputs can be
timed independently.