Ensemble Designs 9400 3G Test Signal and Sync Pulse Generator - Manual (Page 49)

www.ensembledesigns.com Avenue 7400 and 9400 - Page 49
Model 7400 HD/SD and Model 9400 3G/HD/SD Sync Pulse Generator and Test Signal Generator
Timing B Menu
Setting the Timing for Generator B
The Timing B menu shown below allows you to set the timing of the Generator B outputs with
respect to the reference selected in the SPG B menu. This menu affects the SDI output, the principal
output of the generator, which applies to SDI Out B and Programmable Output 1 B (Out 1 B BNC).
Use the slider controls or arrows to select a value or enter a value into the number fields.
• Vert Timing – Set the vertical timing in lines. Range is -525 to 525, default is 0.
• Hor Timing – Set the horizontal timing in clocks. Range is -1716 to 1716, default is 0.
• Fine Phase – Set the fine phase of the Primary output in nanoseconds. Range is -35 to 35,
default is 0.
Timing B Touch Screen Menu
Timing B Avenue PC Menu