Storage menu – Ensemble Designs 9400 3G Test Signal and Sync Pulse Generator User Manual
Page 66

www.ensembledesigns.com
Avenue 7400 and 9400 - Page 66
Model 7400 HD/SD and Model 9400 3G/HD/SD Sync Pulse Generator and Test Signal Generator
Storage Menu
Loading Custom Test Signals, Viewing SD Card and RAM Status
With the Storage menu shown below, you can view the SD card status, load custom test signals from
the SD card, and view the amount of RAM available for both generators. Each 7400 and 9400 comes
with a 2 GB SD Flash Memory card for storing your custom test patterns. Additionally, each 7400 and
9400 ships with two 512 MB DDR2 RAM cards installed on the back of the module, these can be field
upgraded to up to 2 GB each if desired.
Use the Load button to load your custom test signals from the SD Card.
The Storage menu also provides these reporting fields:
• SD Card Status – Reflects the status of the SD Card; None, Error, Busy or Ready.
• RAM Module 1 – Shows the RAM capacity of Generator 1; None, Bad Memory, 256 MB,
512 MB, 1 GB, 2 GB.
• RAM Module 2 – Shows the RAM capacity of Generator 2; None, Bad Memory, 256 MB,
512 MB, 1 GB, 2 GB.
Storage Touch Screen Menu
Storage Avenue PC Menu