Ensemble Designs 8500 Composite / SD Legalizer and Video Processing Frame Sync User Manual
Page 47
Avenue Touch Screen Remote Configuration
The Avenue Touch Screen remote control status menu for this module is illustrated and
explained below. Refer to the 8500 Parameter Table for a summary of available parame-
ters that can be set remotely through the menus illustrated. The Configuration
Summary gives tips and general background information on setting the parameters. For
more information on using Avenue Touch Screen, refer to the Avenue System Overview.
Parameter fields that are grayed out can indicate one of the following conditions:
•
An option is not installed.
•
The function is not active.
•
The module is locked.
•
The User Level set with Avenue PC is not accessible from the current User Level.
NOTE
: Different audio menus will appear when an 8415 Audio Processor
submodule is installed. The menu differences will be explained in this section.
8500 Avenue Touch Screen Menus
The Vid In menu shown below allows you to configure the following input sources:
•
Input Sel – use this control to set the video input mode connected to the module.
•
Ref Source – use this control to set the reference input source.
•
Comb Mode – set the type of comb filter (3- or 5-line) for the video input.
Status reporting is provided for the following conditions:
•
Input – reports the input status as No Input, 525 Lock, or 625 Lock.
•
EDH Status – reports the presence of EDH, EDA, and IDA errors.
•
Error Seconds – displays the number of seconds that a detected EDH error has
been present in the serial data stream.
•
Reference – reports the status of the reference input as either No Reference,
Ref Mismatch, Ref Unlocked, Ref 525 Lock, or Ref 625 Lock.
8500-47
Model 8500 Series Modules