Ensemble Designs 8500 Composite / SD Legalizer and Video Processing Frame Sync User Manual
Page 3
chroma, pedestal, and hue knobs, live shading is easy. The continuous rotation velocity
sensitive knobs are responsive and dependable. Audio levels for multiple groups are easily
accessed as well. All other parameters, including timing and audio delay, are accessed
through an intuitive menu interface. 8500 module memory registers can be used to save
the complete configuration of the module, making it easy to change instantly between
different configurations.
Modules at software version 2.2.0 or later support SNMP (Simple Network Management
Protocol) monitoring. For each applicable signal processing module, module, signal, and
reference status are reported. For complete details on using SNMP monitoring, refer to
the Avenue System Overview in the manual that accompanies each frame.
There are three BNCs on the rear module that can be configured with onboard switches.
One BNC can be set for either SDI or composite video out. The AES 1/2 and 3/4 outputs
(with the 8410 or 8510 submodule installed) can be set independently as SDI video or AES
outputs. With the 8415 submodule installed, the AES 5/6 and 7/8 outputs can be set inde-
pendently as SDI video or AES outputs.
8500 with 8410 Functional Block Diagram
Model 8500 Series Modules
8500-3