Appendix 4 system upgrade error code, Appendix 5 map of screens (remote setup) – Eneo KBD-NSC-100 User Manual
Page 40

40
APPENDIX 4
System Upgrade Error Code
When an error occurs during the software upgrade, refer to the following error code.
No.
Description
No.
Description
0
Unknown error
302
Remote upgrade is not authorized.
1
File version error
303
Saving remote package failed.
3
Software version error
304
Remote upgrade is cancelled by the user.
4
Kernel version error
400
USB device mounting failed.
101
The upgrade file is not found.
401
Reading upgrade package on the USB device failed.
102
Extracting package failed.
402
Copying upgrade package on the USB device failed.
105
Invalid package
403
USB device is not connected.
300
Remote connection failed.
404
USB device is currently in use.
301
Remote network error
405
The file system is not supported.
APPENDIX 5
Map of Screens (Remote Setup)
eneo
®
is a registered trademark of Videor E. Hartig GmbH
Exclusive distribution through specialised trade channels only.
VIDEOR E. Hartig GmbH
Carl-Zeiss-Straße 8 · 633 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-00
www.videor.com
V. 1.0
Technical changes reserved.
© Copyright by VIDEOR E. Hartig GmbH 0/009