Eneo KBD-NSC-100 - Manual (Page 35)

35
APPENDIX 2
Buttons
NOTE: In the operation explanation for each button, „ –> ” indicates that the buttons are pressed sequentially, and „&” indicates the buttons are
pressed together.
Operation Command
NOTE: Devices should be registered on the network keyboard and set up properly to perform the commands.
Button Designation Operation
Number ( to 9)
• Device number or ID –> , , , or : Selects a monitor, pane, device,
device or camera to control, or macro to perform.
Number (0)
• –> –> : Starts panic recording of all camera channels of all devices registered on the network
keyboard.
• –> –> & : Stops panic recording of all camera channels of all devices registered on
the network keyboard.
• –> –> & : Deactivates alarm out of all alarm-out channels of all devices registered
on the network keyboard.
Shift
• –> Button : Performs the secondary function of the button if the button supports two functions.
• & : Locks buttons of the network keyboard.
• & : Enters the LCD menu.
ESC
• : Cancels the command during the command operation or returns to the previous menu during the menu
configuration.
Monitor • Monitor ID –> : Allows you to select the monitor.
Pane • Pane No. or ID –> : Allows you to select the selected pane.
Device • Device No. or ID –> : Allows you to control the selected device.
Camera • Camera No. or ID –> : Allows you to control the selected camera.
Macro • Macro ID –> : Performs the selected macro.
– / +
• Selects the previous or next monitor, pane, device or camera during the command operation.
• Navigates through setup menus or adjust number’s value during menu configuration.
Function ( to 8) • Performs the preset function.