Eneo KBD-NSC-100 - Manual (Page 21)

4. Press the button.
5. Press the camera ID.
6. Press the button. Video from the camera is displayed in the selected pane, and you can control the camera by using
PTZ control buttons if the camera is a PTZ camera.
Example II
You can control a camera in a specific pane of the main monitor with pressing a pane ID without pressing the monitor ID. For this control, a unique pane
ID should be set up to each pain of a main monitor connected to the MMX (Run the INIT program –> Connect to the Remote Setup menu of the network
keyboard –> Set up the main monitor).
Cameras ~ 6
Master MMX
Spot MMX
Main Out
Loop Out
Video In
. Press the pane ID.
. Press the button. You can control the MMX that the monitor is connected by using the device control buttons.
3. Press the camera ID.
4. Press the button. Video from the camera is displayed in the selected pane, and you can control the camera by using
PTZ control buttons if the camera is a PTZ camera.