Eneo KBD-NSC-100 - Manual (Page 24)

4
4. LCD Menu Configuration
The LCD menu on the LCD screen allows you to set up the system or register devices to control in the Basic mode. The system setup and device registration
are also available remotely by using the INIT program. Refer to
Chapter 5 – Remote Configuration for details on the remote setup and registration.
NOTE: When controlling devices in the Advanced mode, you cannot register the devices in the LCD menu and have to register the devices by using
the INIT program.
4.1 Buttons for LCD Menu Configuration
• : Returns to the previous menu without applying the setting changes. Pressing the button repeatedly until the screen displays Save Setup allows
you to save or cancel the changes.
• +, – / Arrow buttons ( ): Navigates through setup menus or adjust number’s value.
• 0 to 9: Enters a number value (0 to 999).
•
: Enters the LCD menu when pressing the button together with the button.
• : Goes to the submenu, selects an item or completes an entry that you have made.
4.2 Entering or Exiting LCD Menu
. Press the and button together.
. Enter the admin password by using the number button, and then press the button. There is no default password.
3. Pressing the button enters the LCD menu.
4. You can change the settings.
5. Pressing the button until the screen displays Save Setup and selecting Yes by pressing the button saves the
settings and exits the LCD menu.