Eneo KBD-NSC-100 User Manual

Page 15

6.3. Click a monitor in the list, and then the

Edit button. Set up the monitor ID.

The network keyboard assigns the ID automatically when the MMX is registered,

and you can change the ID. The ID will be used to distinguish the monitor from other

monitors when controlling it by using a network keyboard, so each monitor should

have its own unique ID.

6.4. Click a camera in the list, and then the

Edit button.

• When the camera is connected to the

Video In port of the MMX through the Main

Out of the DVR:

− ID: The network keyboard assigns the ID automatically when the MMX is

registered, and you can change the ID. The ID will be used to distinguish the

camera from other cameras when controlling it by using a network keyboard,

so each camera should have its own unique ID.

− Type: Select Device Output and select a DVR which the camera is connected

to from the

Output Device drop-down list.

• When the camera is connected to the

Video In port of the MMX through the

Loop Out of the DVR:

− ID: Set up the camera ID as same as the camera ID of the DVR connected to

the MMX. Otherwise, you cannot control the camera. When clicking the

button displays a message box to confirm the use of the existing ID.

Click the

OK button to complete the changes.

− Type: The camera settings set while registering the DVR connected to the

MMX are applied to the camera identically after the ID setting is complete.