Eneo KBD-NSC-100 - Manual (Page 19)

9
Example II (Advanced Mode)
Cameras ~ 6
DVR
Video Out
. Press the monitor ID.
. Press the button. You can control the DVR that the monitor is connected by using device control buttons if the monitor is
a main monitor.
3. Press the camera ID.
4. Press the button. Video from the camera is displayed in the selected monitor, and you can control the camera by using
PTZ control buttons if the camera is a PTZ camera.
3.4 MMX System Control
You can control MMXs, DVRs connected to the MMX and PTZ cameras connected to the DVRs via network connection. It is required to log in a user with the
authority over the function to control depending on the function when controlling DVRs and PTZ cameras connected to the DVR. If the other user is logged in
the DVR, log the current user out of the DVR and log a user with the proper authority in the DVR. Otherwise, the DVR and PTZ cameras connected to the DVR
are controlled with the authority of the current user. Refer to
Appendix 2 – Buttons for details on each control button.
Controlling PTZ Camera
Cameras ~ 6
Master MMX
Spot MMX
Main Out
Loop Out
Video In
. Press the camera ID.
. Press the button. You can control the camera by using PTZ control buttons.