Eneo KBD-NSC-100 - Manual (Page 14)

4
5.3. Click the Digital Video Recorder pull-down menu in the device list, and then the
registered DVR’s pull-down menu. A list of monitors and cameras supported in the
DVR is displayed.
• [ID] Main Monitor: Displays the monitor ID and type.
• [ID] Spot Monitor No.: Displays the monitor ID, monitor type and the Spot
Out number of the DVR.
• [ID] „Camera Name”: Displays the ID and name of the camera.
5.4. Click a camera in the list, and then the Edit button. Set up the camera information.
• ID: The network keyboard assigns the ID automatically when the DVR is
registered, and you can change the ID. The ID will be used to distinguish the
camera from other cameras when controlling it by using a network keyboard, so
each camera should have its own unique ID.
• Type: Set up the camera type.
− Fixed: Select if the camera is not a PTZ camera.
− PTZ Camera: Select if the camera is a PTZ camera.
6. Go to the following menus: Setup –> Remote Setup –> Device –> Setup
Click Matrix in the device list, and then the Scan or Add button to register the master
MMX.
6.. Set up the registration information.
• ID: The network keyboard assigns the ID automatically when the MMX is
registered, and you can change the ID. The ID will be used to distinguish the MMX
from other devices when controlling the MMX by using a network keyboard, so
each device should have its own unique ID.
• Slave MMX: Select the number of slave MMXs daisy-chained to the master MMX.
• Spot MMX Monitor: Select the number of spot monitors connected to spot MMXs
which are connected to the master MMX and slave MMXs.
• IP Address, Control Port, User ID, Password: Enter the IP address, port number,
user ID and password for the connection to the MMX.
6.. Click the Matrix pull-down menu in the device list, and then the registered MMX’s
pull-down menu. A list of monitors and cameras supported in the MMX is displayed.
• [ID] Main Monitor: Displays the monitor ID and type.
• [ID] Spot MMX Monitor No.: Displays the monitor ID, monitor type and the
Spot Out number of the spot MMX.
• [ID] „Camera Name”: Displays the ID and name of the camera connected to
the master MMX and slave MMXs.