ARM Electronics RDVR16A - Manual (Page 29)

5.13 ADVANCE MENU ___NETWORK 5.13 ADVANCE MENU ___NETWORK
Move the cursor to the “SYSTEM”, and press ”ENTER”, then the screen will show the
following options.
NETWORK NETWORK
NETWORK TYPE STATIC
DNS 61. 66. 138. 53
PORT 0 0 8 0
1) NETWORK TYPE:
Move the cursor to NETWORK TYPE, and press “＋” or “－” button to
choose the network type (STATIC, DHCP, PPPOE), and then press “ENTER”
to go to the submenu of the network. Use “＋” or “－” button to set all the
information needed in the DVR. For example, static IP.
25
Use the following buttons for menu setting:
“ “ to move the cursor.
“＋ , －” to choose the numbers / selections.
“ ENTER “ to go to the submenu / to confirm the selection
“ MENU “ to exit the menu OSD
▲
▲
STATIC STATIC
IP 61. 66. 138. 53
GATEWAY 61. 66. 138. 65
NETMASK 255. 255. 255. 0