8 advance menu ___detection – ARM Electronics RDVR16A User Manual
Page 23
1)
TITLE:
Move the cursor to the title which you want to change the title, and press
“ENTER” to go in the setting screen. Assign each channel a title (up to six
characters (letters or symbols…)), the default title is the channel number.
2)
BRIG / CONT / SATU / HUE:
Adjust the Brightness/Contrast/Saturation/Hue of each channel.
The level is from 0 to 255. The default value is 128.
3)
COV (COVERT):
Select “YES” to mask the selected channel which is under recording.
4)
RECORD:
Select “YES” to enable the record function; Select “NO” to disable the record
function.
5)
UP / DOWN:
Select “UP” to go to the previous page; Select “DOWN” to go the next page.
5.8 ADVANCE MENU ___DETECTION
5.8 ADVANCE MENU ___DETECTION
Move the cursor to the “DETECTION”, and press ”ENTER”, then the screen will show
the following options.
DETECTION
DETECTION
TITLE
DET
AREA
LS
SS
TS
RE
ALARM
01
ON
SETUP
07
03
02
10
OFF
02
ON
SETUP
07
03
02
10
LOW
03
ON
SETUP
07
03
02
10
HIGH
04
ON
SETUP
07
03
02
10
OFF
05
ON
SETUP
07
03
02
10
OFF
06
ON
SETUP
07
03
02
10
OFF
07
ON
SETUP
07
03
02
10
OFF
08
ON
SETUP
07
03
02
10
OFF
UP
DOWN
NOTE:
TITLE : 6 characters (letters or symbols…).
BRIG : from 0 ~ 255, the default value is 128.
CONT : from 0 ~ 255, the default value is 128.
SATU : from 0 ~ 255, the default value is 128.
HUE : from 0 ~ 255, the default value is 128.
CONV : YES or NO.
REC : YES or NO.
19