ARM Electronics RDVR16A - Manual (Page 20)

8) EVENT RECORD IPS:
Recording is activated by event (alarm and motion trigger). Select the
images per second of EVENT RECORD, The options are as the followings:
NTSC NTSC: FRAME: 120, 60, 30, 15 PAL PAL: FRAME: 100, 50, 25, 12
FIELD: 240, 120, 60, 30 FIELD: 200, 100, 50, 25
CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50
9) TIMER RECORD IPS:
Recording is activated by timer schedule. Select the images per second of
TIMER RECORD, The options are as the followings:
NTSC NTSC: FRAME: 120, 60, 30, 15 PAL PAL: FRAME: 100, 50, 25, 12
FIELD: 240, 120, 60, 30 FIELD: 200, 100, 50, 25
CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50
10) TOTAL IPS SHARE:
There are two IPS settings:
FIX FIX: IPS per channel = RECORD IPS ÷ 16 channels
GROUP GROUP: every 4 channels will form a group.
IPS per channel = RECORD IPS ÷ 4 ÷ number
of channels under recording within the group.
Ex.: If you set the record IPS as 480 IPS, then
Channel 01 will get 120 IPS (480 / 4 / 1 = 120)
Channel 05 and 06 each will get 60 IPS (480 / 4 / 2 = 60)
“
● “ means under recording
5.4 MAIN MENU OPTIONS___TIMER 5.4 MAIN MENU OPTIONS___TIMER
(MENU)
RECORD
► TIMER TIMER
DATE
ADVANCE
Move the cursor to the “TIMER”, and press ”ENTER”, then the screen will show the
following options.
TIMER TIMER
DATE HH : MM HH : MM
OFF 00 : 00 00 : 00
DAILY 08 : 00 18 : 00
SUN 06 : 00 23 : 00
MON-FRI 00 : 00 00 : 00
OFF 00 : 00 00 : 00
OFF 00 : 00 00 : 00
OFF 00 : 00 00 : 00
16
●
06
●
05
●
01
Group 1 :
CH 01 ~ 04
Group 2 :
CH 05 ~ 08
Group 3 :
CH 09 ~ 12
Group 4 :
CH 13 ~ 16