Aqua Lung WTX-D Buoyancy System User Manual

Page 31

Table of Contents

WARNING:

Verify the tension of the cylinder band prior to every dive. Failure to do so may

result in the cylinder slipping during the course of a dive.

2. Push the lever forward until it stops in the pre-locked position (this keeps your fingers from being

caught in the lever). Push the lever down into the locked position. Verify the lever is secured in

the locked position. Once the cylinder band is set up, further adjustment is typically not needed.

Repeat procedure to secure lower cylinder band.

3. Check that the cylinder band is secure by pulling on the

band while holding down the cylinder at the valve. If

the cylinder band moves, it is too loose. Check that the

macro adjustment is set for the correct size cylinder and

repeat steps 1 & 2.