Aqua Lung WTX-D Buoyancy System User Manual

Page 23

Table of Contents

CAUTION:

The cylinder bands must be run through the center webbing loop only on the

WTX harness when using a WTX-D buoyancy cell. Trying to configure the cylinder bands

differently can cause damage to the buoyancy cell which is not covered by warranty.

2. Insert the cylinder band through the center web loop

on the WTX harness.

4. Repeat the process for the lower cylinder band.
See the following section to finish attaching the WTX-D system to a cylinder:

3. Bring the cylinder band end around and exit through

the upper left oval grommet hole on the buoyancy cell.