Aqua Lung WTX-D Buoyancy System User Manual

Page 17

Table of Contents

5. Repeat the process for the lower cylinder band.
See the following section to finish attaching the WTX-D system to a cylinder:

NOTE:

Apeks recommends using traction sleeves with universal cylinder bands as added

security to keep the cylinder from slipping during the course of a dive.

4. Turn the buoyancy cell back over, so the zipper side

is face up. Slide the traction sleeve (PN 10017, sold

separately) onto the open end of the cylinder band

with the ribbed side facing toward the cylinder.

3. Turn the buoyancy cell over and place the WTX

backplate on top with the Apeks logo face up. Insert

the cylinder band into slot 1, bring it around the plate

and out slot 2. After exiting slot 2, direct the cylinder

band out the upper right oval grommet hole on the

buoyancy cell. Make sure the cylinder band passes

through both slots in the plate and buoyancy cell

grommet holes.