Aqua Lung WTX-D Buoyancy System User Manual

Page 16

Table of Contents

1. Set the buoyancy cell on a flat surface with the zipper

side face up. Insert the cylinder band through the upper

left oval grommet hole with the hook and loop side of

the band facing down towards the buoyancy cell.

A buoyancy cell may be attached directly to a WTX backplate using universal cylinder bands. Using

optional 3/8” book screws (PN 388112, sold separately) will help keep the buoyancy cell and backplate

held together while assembling the cylinder bands.

MOUNTING A WTX-D BUOYANCY CELL USING THE WTX BACKPLATE

AND UNIVERSAL CYLINDER BANDS

2. Identify the two upper and lower vertical slots in the

center of the WTX backplate at the top and bottom.