Aqua Lung WTX-D Buoyancy System User Manual

Page 11

Table of Contents

NOTE:

The terms “Hook & Loop” are used throughout this manual. Hook & Loop is commonly

known as Velcro®, which is a trademarked brand of hook & loop. Some of the BC components

have hook & loop attachments, including the cylinder band, weight pouch flaps and inflator

hold down.

MOUNTING A WTX-D BUOYANCY CELL USING THE WTX HARNESS AND

UNIVERSAL CYLINDER BANDS

A buoyancy cell may be attached directly to an Apeks WTX harness using universal cylinder bands.

Using optional 3/4” book screws (PN 388113, sold separately) will help keep the buoyancy cell and WTX

harness held together while assembling the cylinder bands.

1. Set the buoyancy cell on a flat surface with the zipper

side face up. Insert the cylinder band through the upper

left oval grommet hole with the hook and loop side of

the band facing down towards the buoyancy cell.