Aqua Lung WTX-D Buoyancy System - Manual (Page 13)

Table of Contents
© 2014 Apeks
3. Bring the cylinder band end around and exit through
the upper right oval grommet hole on the buoyancy
cell. Slide the traction sleeve (included with the WTX
harness) onto the open end of the cylinder band with
the ribbed side facing toward the cylinder.
NOTE: Apeks recommends using traction sleeves with universal cylinder bands as added
security to keep the cylinder from slipping during the course of a dive.
4. Repeat the process for the lower cylinder band.
See the following section to finish attaching the WTX-D system to a cylinder:
• Universal Cylinder Band Setup