Aqua Lung WTX-D Buoyancy System - Manual (Page 20)

Table of Contents
© 2014 Apeks
WARNING: Verify the tension of the cylinder band prior to every dive. Failure to do so may
result in the cylinder slipping during the course of a dive.
6. Check the cylinder band is secure by pulling on the
band while holding down the cylinder at the valve. If the
cylinder band moves, it is too loose. Repeat steps 1-5.
5. Repeat process for lower cylinder band.
4. Pull the cam buckle closed so that it lies flat against the
cylinder. Secure the end of the cylinder band with the
hook & loop attachment.