Aqua Lung WTX-D Buoyancy System User Manual
Page 22
Table of Contents
© 2014 Apeks
NOTE:
You must have a current model WTX harness that has the center webbing loop in order
to use a WTX-D buoyancy cell. The original WTX harness does not have a center webbing
loop and, therefore it is not compatible with the WTX-D buoyancy cell.
Original WTX Harness
No Center Webbing Loop
Current WTX Harness
Center Webbing Loop
GripLock
Patch
1. Set the buoyancy cell on a flat surface with the zipper side face up. Remove the bail from the cylinder
band. Insert the GripLock™ band through the upper right oval grommet hole with the GripLock™ patch
facing up.